How to tie the rope of the lower bunk bed curtains without collapsing them

Pull the rope over the bed frame. Be sure to pull it tight or the gravity of the bed curtains will collapse the rope. Thread hanging rings on the bed curtains. Hanging rings are usually sent by the store, they are movable and can be opened and closed, which is very convenient. Fasten the rings to the rope. Fasten the rings closed. The bed curtain can be slid on top of the rope and pulled. Very easy to use.

The zigzag winding method can release the top collapse, reduce the carrying capacity of the four steel pipes, and can make the whole long bed curtain more flat and beautiful. For the zigzag winding method, you need to use a longer rope to tie a knot in one corner of the bed curtain to ensure that the knotted part will not move freely. Then, wrap the steel tube around the opposite corner of the zigzag and then around the opposite tube. Don't pull it too tight as long as you can lift the top up. Look at the spacing between each row.

Methods of tying ropes at the top of bed curtains: 1. Cross method To prepare a long rope, or tie several ropes diagonally and then one across the center; Corner knot method for bed curtains Drag out each corner of the bed curtain and secure the pulled out portion with a rope, making sure to pull it flat. Bending moment distribution method Nowadays, many students install bed curtains for their beds, mainly to block the dust from the top of the wall, but also for privacy.

The key issue is that the rope should be tied tightly and knotted. In addition, the lower bunk can hang curtain eyebrows (not the upper bunk, which is not good to install). When hanging, the two inside cords need to be hung on the brackets of the top bunk. The two outer corners need to be hung on the ladder leading to the top bunk. There will be more room that way. Then hang the bottom two corners on the side brackets of the lower bunk.

Crossover method Nowadays many students install bed curtains for their beds, mainly to keep out dust from the top of the walls, etc., and also for privacy, but sometimes the curtains are not flat and will sag, especially if they sleep on the top bunk, and the whole space will be smaller.

If you are using thin wire, thread the curtain through the wire before tying the rope. This will ensure the stability of the curtain. To keep the bed curtains vertical, use hooks that can be moved 180 degrees so that they do not interfere with other people's rest at night when using the computer. Clip the bed curtains in place with curtain clips or you can use four stick-on hooks and wrap the rope around the four hooks.

Tying Upper Bed Curtains with Rope

There are two ways to tie the bed curtains: one is winding with rope to fix four steel pipes, the rope must pass through the steel pipe, the steel pipe is fixed from the top with rope winding; winding Z-shaped reinforcement method, a Z-shaped rope is inserted at the top of the bed curtains, and the end of the rope needs to be wrapped around the corner of the bed curtains to ensure that the top is not collapsed.

Methods of tying ropes at the top of the bed curtain: 1. Cross method, to prepare a long rope, or diagonally tied a few ropes, and then the middle of the cross tied one; corner knot method of bed curtains, drag out each corner of the bed curtains, and then pull out the part of the rope to fix it, be sure to pull it flat. Bending moment distribution method Nowadays, many students install bed curtains for their beds, mainly to block the dust from the top of the wall, but also for privacy.

The method of tying the upper bed curtains is divided into two kinds: wrap around the fixed method, use the rope to fix the four steel tubes, the rope must go through the steel tube part, and from the upper part of the rope wrapped around the steel tube to fix the steel tube; wrap around the Z-shaped reinforcement method, the top of the bed curtains with the rope interspersed with the Z-shaped, the end of the line needs to be wrapped around one of the corners of the bed curtains, to be able to make sure that the top is not collapsed.

In practice, you can first tie one end of the rope to the top of the bed curtain to ensure that it is firmly tied. Then, toss the other end of the rope towards the ceiling and try to keep it as close to the edge of the wall or bed frame as possible, which will make the bed curtains more flat. Next, use sticky hooks or other fixtures to secure the rope to the ceiling. Sticky hooks are great for hanging bed curtains because they don't need to damage the wall, but they are also able to hold some weight, which makes them perfect for hanging bed curtains.

How to install dormitory bed curtains

1, prepare tools and materials: screwdriver, screws, bed curtain bracket, bed curtain. Determine the installation position: according to personal needs and the structure of the bed, determine the installation position of the bed curtain. Usually, the bed curtain can be installed at the head or tail of the upper bed. Installation of bed curtain bracket: use a screwdriver to fix the bed curtain bracket on the top of the bed.

2, for the dormitory bunk with hooks, you can connect a strong line between the two hooks, and then hang the curtain with hooks, the hooks on the curtain one by one set on the rope to complete the installation. If the dormitory is the top bunk, you need to pull a rope between the head and tail of the bed and the two iron bars used to tie the mosquito net, using small clips to fix the bed sheet as curtains.

3, recommended the use of bed curtain track oh, it can make your bed curtains obedient, do not run around. Use ties to fix the track in the gap between the bed sheet and the bed frame, just like finding a stable nest for the track, it will not move around.

4, first of all, determine the installation position of the bed curtain. Usually bed curtains are installed on top of the bed to cover the space above. Measure the width and length of the bed in order to purchase the right size bed curtains. Purchase the bed curtains and the required mounting accessories, such as hooks, cords or springs. Determine how the bed curtains will be hung.

How to wrap the rope on the top of the bed curtain

There are two ways to tie the bed curtains: one is to wrap the four steel pipes fixed with ropes, the ropes must pass through the steel pipes, the steel pipes are fixed from the upper part with ropes wrapped around them; the winding Z-shaped reinforcement method, a Z-shaped rope is inserted at the top of the bed curtains, and the end of the rope needs to be wrapped around the corner of the bed curtains, to ensure that the top is not collapsed.

Methods of tying ropes at the top of the bed curtain: 1. Cross method, to prepare a long rope, or diagonally tied a few ropes, and then the middle of the cross tied one; corner knot method of bed curtains, drag out each corner of the bed curtains, and then pull out the part of the rope to fix it, be sure to pull it flat. Bending moment distribution method Nowadays, many students install bed curtains for their beds, mainly to block the dust from the top of the wall, but also for privacy.

The method of tying the top rope of the bed curtain: the cross method, you need to prepare a relatively long rope, or multiple sections of rope to bind diagonally, and then a section of the middle part of the cross; bed curtain corner knotting method, each corner of the bed curtains are dragged outward a part of the bed curtains, and then the rope will be dragged out of the part of the rope to be fixed, be sure to pull it flat.